Push-pull training consists of two workouts: pushing exercises for the chest, shoulders, and triceps and pulling exercises for the back, biceps, and forearms. This can help improve muscle power.

A push-pull workout is a training style that targets muscles based on whether they involve a pushing or pulling action.

These workouts are popular among bodybuilders and other athletes because they optimize recovery time between workouts and help create a balanced physique.

This article explains what you need to know about push-pull workouts and includes a routine you can use for building muscle.

With the push-pull training style, you train upper body muscles that perform pushing movements one day. Then, you train the upper body muscles that perform pulling movements another day, either on the following day or separated by a rest day, depending on your experience level.

The muscles that perform pushing and pulling movements include:

  • Pushing: chest, shoulders, and triceps
  • Pulling: back, biceps, and forearms

A day for training the lower body and core typically follows the push and pull workout days, either the following day or separated by a rest day.

The leg muscles include those located on the front (quadriceps) and back (hamstrings) of the thigh, as well as the glutes and calves.

Push-pull training allows you to exercise all the major muscle groups a maximum of twice weekly, assuming you train 6 days a week with 1 day off.

Recent research suggests that, for most people, training in this way (rather than focusing on a single muscle group each day) can lead to maximal strength gains.

Push-pull workouts are great for anyone looking to gain muscle size and strength, including beginners.

Note: How frequently you train each week may depend on your experience level, which this article will cover in more detail below.

Summary

Push-pull is a style of training that structures workouts based on whether the muscle performs a pushing or a pulling action.

There are several benefits to a push-pull training regimen.

Allows for optimal recovery

Traditional bodybuilding-style workouts involve training one or twoTrusted Source body parts per day.

This means you might train your chest one day, shoulders the next, triceps the day after that, and so forth.

But even if you’re focusing on your chest one day, your shoulder muscles inevitably have to work, too, because they are synergist muscles helping to perform movements like the chest fly and bench press.

In this way, you end up training many of the same body parts multiple days in a row, which may, with time, overstress your muscles.

The push-pull training regimen allows your muscles the recommended 48 to 72 hours of rest to fully recover before training again.

This is because you can train a major muscle group only once every 3 days.

Anyone can benefit

Anyone can perform the push-pull training regimen and benefit from it.

You can adjust the number of times you train according to your experience with strength training:

  • Beginner: Beginners with less than 6 months of training should alternate training days with rest days to allow for a maximum of 3 training days per week.
  • Intermediate: Those with intermediate weightlifting experience (6 months to 2 years of training) should consider training 3–4 days per week.
  • Advanced: Those with advanced resistance training experience (more than 2 years) can train up to 6 times per week with 1 rest day separating each split.

Examples of training splits for beginners and intermediate and advanced lifters include:

Beginner and intermediate lifters

  • Day 1: push
  • Day 2: rest
  • Day 3: pull
  • Day 4: rest
  • Day 5: legs and core

Advanced lifters

  • Day 1: push
  • Day 2: pull
  • Day 3: legs and core
  • Day 4: rest
  • Day 5: push
  • Day 6: pull
  • Day 7: legs and core

You can increase or decrease the per-workout volume (repetitions, sets, and weight) for specific muscle groups according to your preferences and training goals.

Summary

The push-pull training regimen supports muscle recovery, and anyone can perform the workouts.

Here is a sample push-pull routine with workouts separated by a rest day.

Perform 3 to 4 sets of 8 to 12 repetitions for each exercise, and rest for 2 to 3 minutes between sets.

Day 1: Push

Seated dumbbell shoulder press: With dumbbells positioned to each side of your shoulders and elbows below your wrists, press up until your arms are extended overhead. Pause for a second at the top, and then slowly lower your elbows back down to the starting position.

Dumbbell incline chest press: Position dumbbells to the sides of your upper chest and press up until your arms are extended. Then, slowly lower your elbows back to the starting position.

Dumbbell incline chest press

Skull crushers: Sit on the bench with the barbell on your lap. Hold the barbell with your palms facing down with a shoulder-width grip while keeping your wrists straight. Lie on your back as you bring the weight to a position over your collarbone. With your shoulders stable, slowly bend your elbows and bring the weight down to just past your head. Keep your elbows pointing straight as you lower the weight. Hold for 1 to 2 seconds. Then straighten your elbows, pushing the weight back to an overhead position. For proper skull crusher form, keep your humerus bone fixed throughout the movement.

Skull crushers

Cable rope triceps pushdown: Facing a high pulley cable system, grasp the rope attachment. With elbows to your sides, extend your arms down and turn your palms down at the bottom. Slowly let your forearms come back up while keeping your elbows pinned to the sides of your body.

Incline dumbbell chest fly: With dumbbells above your upper chest, palms facing inward, and arms extended in a slightly bent position, lower dumbbells outward to the sides of your shoulders. Keep elbows slightly bent and bring the dumbbells back together in a hugging motion above your upper chest.

Incline dumbbell chest fly

Dumbbell lateral shoulder raises: Holding dumbbells at your sides, keep your elbows slightly bent while raising your arms until your elbows are at shoulder height. Slowly lower your elbows back down.

Dumbbell lateral shoulder raises

Day 2: Rest

Do not perform resistance training on your rest day.

Day 3: Pull

Bent-over barbell row: Hold the barbell with a shoulder-width overhand grip. Keep your feet hip-width apart and knees slightly bent. Slowly hinge by pushing your hips back, keeping your arms and the barbell close to your legs. While maintaining a long and neutral spine, bend your elbows, pulling them back alongside your body, and then slowly straighten your arms again.

Cable pulldown: Grasp a cable bar slightly wider than shoulder width and sit with your thighs under the support pads. Pull the cable bar down to your upper chest, keeping your lower back slightly curved. Slowly begin to straighten your arms and return to the starting position.

Dumbbell shrugs: Holding dumbbells at your sides, shrug your shoulders as high as possible, and then relax them back down.

Bicep curls: Grasp a barbell or dumbbell with a shoulder-width underhand grip. Keeping your elbows at your sides, raise the weight until your forearms are vertical. Pause at the top, and then slowly lower the weight back to the starting position.

Bicep curls

Day 4: Rest

Do not perform resistance training on your rest day.

Day 5: Legs and core

Deadlift: Squat down and grasp the barbell with a shoulder-width overhand grip. Keep your feet flat and lift the bar by fully extending your hips and knees. Slowly lower the bar back down to the floor by hinging at your hips with a slight bend in your knees.

Deadlift

Barbell back squat: Position the barbell on the back of your shoulders and grasp the bar to stabilize it. Squat down by bending at the hips until your knees and hips are fully bent. Return to standing by pressing through your heels and squeezing your glutes.

Barbell back squat

Lunges: Stand with your feet hip-width apart. Then step forward farther than your walking stride so that one leg is in front of your torso and the other behind. Your front foot should remain flat while your rear heel rises off the ground. Bend your knees to approximately 90 degrees to lower yourself. Keep your body upright and engage your core. Then, forcefully push off from your front leg to return to the starting lunge position.

Seated hamstring leg curls: Sitting on a leg curl machine, bring your lower legs to the back of your thighs by flexing your knees, and then slowly straighten your legs again.

Dumbbell standing calf raise: Grasp the dumbbells in each hand at your sides. Position the balls of your feet on a platform with your heels hanging over. Raise your heels as high as possible, and then slowly lower them back down.

Hanging leg raises: Grasp a bar overhead. Raise your legs by flexing at the hips and knees until your hips are fully flexed, slowly bringing your knees up toward your chest. Lower your legs back down. For more challenge, keep your legs straight, as in the example below.

Hanging straight leg raise
Summary

This workout routine provides examples of push, pull, and leg and core exercises separated by rest days.

Here are some tips and other factors to keep in mind when implementing a push-pull training regimen.

Choosing a weight

Use a weight heavy enough that it allows you to barely perform the desired number of repetitions.

For example, if your goal is to perform 10 repetitions of an exercise, use a weight heavy enough that the ninth and tenth reps become more difficult.

However, you should still be able to maintain good form by the tenth rep. If you can’t, the weight is too heavy.

Using the same example, if you can perform more than 10 reps with good form, increase the weight you use.

It’s a good idea to record your reps and weight lifted for each exercise so you can track your progress over time.

Incorporate variety

Incorporating variety into your workout routine can help you avoid boredom and stimulate your muscles in different ways.

You can add variety to your routine by using different cable attachments and using dumbbells instead of barbells, or vice versa, for certain exercises.

For example, you could use a straight bar instead of a rope cable attachment for triceps pushdowns or a barbell rather than dumbbells for an incline chest press.

You can also perform many of the same exercises with cables as with dumbbells and barbells, such as:

  • biceps curls
  • chest flyes
  • lateral raises

Additionally, you can incorporate variety by performing both unilateral and bilateral exercises using cables or dumbbells.

Unilateral exercises are performed with one arm or leg at a time, whereas bilateral exercises are performed with two arms or two legs.

Get enough nutrition and sleep

Without nutritious meals and sufficient sleep, you may be more prone to injuries and illness and likely won’t achieve the results you could have if one or both of these components were in order. Eating nutrient-rich foods can support your immune health.

Here are some basic guidelines to follow:

  • Consume mostly nutrient-dense foods such as fruits and vegetables, lean meats, low fat dairy, nuts, and legumes.
  • Limit your intake of alcohol, highly processed foods such as frozen dinners, and foods that contain added sugars, like cakes, cookies, desserts, candy, and certain condiments. In addition to containing a high number of calories with few nutrients, these foods promote inflammation in your body, which can be detrimental to your health and training goals, especially if you consume these foods in excess.
  • Teenagers should sleep a recommendedTrusted Source 8 to 10 hours per night, while adults should aim for 7 to 9 hours.

Here are a few tips to optimize your sleep:

  • Limit your exposure to blue light from screens before bed.
  • Avoid consuming caffeine before bed.
  • Use blackout curtains or a sleep mask to induce deep sleep.
  • Go to bed and wake up at the same time each day.
Summary

To get the most out of the push-pull training split, use the appropriate resistance or weight and incorporate variety. Proper nutrition and sufficient sleep are also important.

A push-pull training split generally refers to workouts centered on muscle groups that perform similar actions.

“Push” workouts train the chest, shoulders, and triceps, while “pull” workouts train the back, biceps, and forearms. This training split also includes a day for training the lower body and core.

The push-pull training regimen supports muscle recovery, and anyone can perform it, regardless of training experience level.

If you have difficulty getting started or are worried about your form, consider seeking the help of a personal trainer if possible.